in-store merchandising that works!
Shelf-edge Sign Holders
Flat Surface Sign Holders
Wire Fences & Baskets
Arcylic Sign Holders & Displays
Ceiling Signage Systems
Acrylic Sign Holders
Literature Holders
Tapeless Solutions - Miracle-Sticks®
Custom Wire-form Fabrications
Custom Acrylics
Custom Displays
Designing and producing custom solutions is our specialty using acrylic fabrication, metal fabrication and profile
extrusions. Here are some examples of what we can do as idea starters for RetailerSolutions™.
To discuss your special requirements, please contact us by phone, email or select Get A Quote button above.
CUSTOM
X
Get a Quote >>
Aisle Stacker
Attaches to the gondola standards on an end cap to enable
signing of a side stack of product.
SKU: 80-10110
Commodity Sign Holder
Use for commodity signage on freezer cases
and multi-deck merchandisers.
• Horizontal arm length made to order based on size of signage.
• Unit can be custom designed with arc or other design.
• Has flat base for attaching to top of refrigerated or freezer cases.
• Mounting hardware not included.
SKU: 80-10210
Warehouse Rack Sign Holder
Sign holder that rotates when bumped fits into the slots on
warehouse racking. Will be custom sized and powder coated
to specification.
SKU: 80-10310
Ball Corral
• Wire cage with swing open top.
• Wheels are optional.
• Holds basketballs, soccer balls, for use in school gym classes.
SKU: 80-50000
a. Beer Keg Merchandiser
Used to merchandise beer in small kegs with a pegboard top for
cross-merchandising and signage.
SKU: 80-20020
b. Wire Panel with Shelving
Wire panel for holding shelves or peghooks.
Floor based with feet to provide stability.
SKU: 80-30100
c. Rotating Rack with Shelving
Rotating floor merchandiser has 4 faces for holding wire shelving
or peghooks.
SKU:80-30200
a. Half Keg Merchandiser
Floor merchandiser for merchandising half-kegs of beer.
Wire frame on top for slide-over signage.
SKU: 80-20010
b. Three Tier Literature Center
Floor merchandiser for catalogs. On wheels that lock for easy mobility. Can be custom designed for a variety of literature sizes.
SKU: 80-25010
c. Craft Display Center
Floor merchandiser for merchandising crafts or other products.
Wire frame on top for slide-over signage.
SKU: 80-20010
E-Z Connect Literature Holder, Dual Attachment
• Metal literature holder with dual connect to gondola channel.
• Holds tri-fold literature 4.125" wide by 8.5"H.
• Included screws lock channel adapter into shelf channel.
• Can be custom made for a variety of literature sizes.
SKU: 80-10010
E-Z™ Sign Frame - Wall Mount
• Custom made to size
• Portrait or landscape orientation
• Top load or side load for graphic panel
• Slat Wall Adapter
• Pegboard Adapter
• Wall Adapter
• Minimum orders may be required
Part no.: 88-10100
E-Z™ Sign Frame - Wall Mount - Slat Wall Adaptor
• Custom made to size
• Portrait or landscape orientation
• Top load or side load for graphic panel
• Slat Wall Adapter
• Pegboard Adapter
• Wall Adapter
• Minimum orders may be required
Part no.: 88-10100
E-Z™ Ceiling Frame
• Custom made to size
• Minimum orders may be required
• Portrait or landscape orientation
• D rings attach to top edge
• Light weight unit
• Top load or side load for graphic panel
SKU: 88-20100
E-Z™ Ceiling Frame Corner
• Custom made to size
• Minimum orders may be required
• Portrait or landscape orientation
• D rings attach to top edge
• Light weight unit
• Top load or side load for graphic panel
SKU: 80-50002
E-Z™ Lock Snap Frame
Front load aluminum snap frame custom made to your size. Frame face flips up for graphic insert and then snap closes to lock graphic in place.
• Stock sizes available
• Factory mitered corners for clean look
• Backer board - Styrene or Fluted plastic
• Mounts to wall, slatwall and pegboard with optional adapters
• Holds graphics up to .063” thick
• For interior or exterior use
• Anodized aluminum or black finish
SKU: 88-20200
E-Z™ Lock Snap Poster Frame
Front load aluminum or plastic snap frame custom made to your size. Frame face flips up for graphic insert and then snap closes to lock graphic in place.
• Stock sizes available
• Rounded corners
• Backer board - Styrene/Fluted Plastic/Hardboard
• Mounts to wall, slatwall and pegboard with options adapters
• Holds graphics up to .094” thick
• Frame profile widths: 28mm and 35mm
• Custom colors available with minimum order
SKU: 88-20300
<
>
Retailer Solutions Co., LLC
1717 Chesterfield Drive | Carrollton, TX 75007 | 972-662-8055
Retailer Solutions Co, LLC and Clik-Clik Systems Inc. make no warranty express or implied, as to the merchantability of the products offered for sale. Samples of stock products are available for evaluation before purchase. Orders for custom packout, custom produced parts are not cancellable or returnable. Products with adhesive may not be returned 30 days after shipment.